LSI MegaRAID SAS 9286-8e Guía de usuario descargar pdf (Pagina 59)

LSI Corporation

- 59 -

6Gb/s MegaRAID SAS RAID Controllers User Guide

August 2012

Chapter 3: MegaRAID SAS RAID Controller Characteristics

6Gb/s MegaRAID SAS RAID Controller Family

3.1.9 MegaRAID SAS 9285 RAID Controllers

The MegaRAID SAS 9285-8e low-profile SAS/SATA RAID controller controls eight external SAS/SATA ports through two

SFF-8088 x4 external mini SAS connectors.

The MegaRAID SAS 9285CV-8e low-profile SAS/SATA RAID controller controls eight external SAS/SATA ports through

two SFF-8088 x4 external mini SAS connectors. This controller supports the CVFM03 onboard 1-GB nonvolatile DDR3

1333MT/s CacheVault Flash Module 03, which connects to a remote CacheVault Power Module 02 to provide backup

for your data in case of power loss.

3.1.9.1 MegaRAID SAS 9285-8e RAID Controller – Board Layout and Jumper/Connector Information

This subsection provides the board layout and the connector information for the MegaRAID SAS 9285-8e RAID

controller. The following figure shows the location of the jumpers and the connectors on the MegaRAID SAS 9285-8e

RAID controller. The jumpers are set at the factory, and you usually do not need to change them.

Figure 22 Layout of the MegaRAID SAS 9285-8e RAID Controller

NOTE Pin 1 on the headers and connectors is highlighted in red in the previous figure.

85082-00

J1A1

J1A2

J2A1

J2A3

J4A1 J4A2 J5A2 J6A1

J2A2

J2B1

J1A3

J1B1

J5B1

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 91 92

Sin comentarios

LSI MegaRAID SAS 9286-8e Guía de usuario Pagina 59