Lsi MiniHAB 44929LO Manual de usuario descargar pdf (Pagina 43)

2 Gbit/s Fibre Channel to PCI Host Adapters 3-1

Chapter 3

Firmware Installation

Procedure

This chapter provides information about installing and conﬁguring Fibre

Channel ﬁrmware and includes these topics:

• Section 3.1, “Introduction,” page 3-1

• Section 3.2, “FC Firmware,” page 3-1

• Section 3.3, “Installing the Firmware,” page 3-3

• Section 3.4, “Conﬁguring the Firmware,” page 3-4

• Section 3.5, “Troubleshooting,” page 3-7

3.1 Introduction

The LSI Logic Fibre Channel chips and host adapters contain ﬁrmware

that presents a multi-protocol service layer based on the LSI Logic

Fusion-MPT architecture. The Fibre Channel ﬁrmware provides FCP

(SCSI-3 over Fibre Channel) Initiator, FCP Target, and LAN interface

services to the host system.

The FC929.ROM ﬁle contains the ﬁrmware that supports the LSIFC929 or

LSIFC919 chips and all associated host adapters.

3.2 FC Firmware

This section includes the features, description, installation, and

conﬁguration of the FC ﬁrmware.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 79 80

Sin comentarios

Lsi MiniHAB 44929LO Manual de usuario Pagina 43