Lsi MiniHAB 44929LO Manual de usuario descargar pdf (Pagina 66)

4-16 BIOS Features

change from auto detect of topology, and that ﬁrmware version 1.00.03

is the minimum revision to support this functionality.

The following is an example of how to select a manual topology N_Port

or NL_Port on a selected Fibre Channel port.

Select the controller you want to modify, as follows:

ok show-disks

a) /pci@1f,0/pci@1/IntraServer,fc@2/disk

b) /pci@1f,0/pci@1/IntraServer,Ultra2-scsi@1/disk

c) /pci@1f,0/pci@1,1/ide@3/cdrom

d) /pci@1f,0/pci@1,1/ide@3/disk

e) /pci@1f,0/pci@1,1/ebus@1/fdthree@14,3203f0

q) NO SELECTION

Enter Selection, q to quit: a

/pci@1f,0/pci@1/IntraServer,fc@2/disk has been selected.

Type ^Y ( Control-Y ) to insert it in the command line.

e.g. ok nvalias mydev ^Y for creating devalias mydev for

/pci@1f,0/pci@1/IntraServer,fc@2/disk

ok select /pci@1f,0/pci@1/IntraServer,fc@2

Then enter commands as shown in the following example:

ok show-topology

Topology selected is auto

Current topology is unknown (no link)

ok set-topology <-Command with no options provides

help

usage is <topology> set-topology

topology = 1 NL_Port

topology = 2 N_Port

topology = a auto

ok 1 set-topology

Topology selected is NL_Port

Topology has been set

Change will take effect after system power cycle

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 79 80

Sin comentarios

Lsi MiniHAB 44929LO Manual de usuario Pagina 66