LSI U80ALVD Manual de usuario descargar pdf (Pagina 22)

2-4 Installing the LSIU80ALVD

2.2.2 Inserting the Host Adapter

For safe and proper installation, check the user’s manual supplied with

your computer and perform the following steps.

Step 1. Ground yourself before removing this host adapter board.

Remove the LSIU80ALVD from the packing and check that it is

not damaged. An example of this host adapter board is shown

in Figure 2.1.

Step 2. Switch off and unplug power cords for all components in your

system.

Step 3. Remove the cabinet cover from your computer to access the

PCI slots.

Caution: Ground yourself by touching a metal surface before

removing the cabinet top. Static charges on your body can

damage electronic components. Handle plug-in boards by

the edge; do not touch board components or gold

connector contacts. The use of a static ground strap is

recommended.

Step 4. Locate the slots for PCI plug-in board installation. Refer to the

user’s manual for your computer to conﬁrm the location of the

PCI slots. The LSIU80ALVD requires a PCI slot that allows bus

master operation.

Step 5. Remove the blank bracket panel on the back of the computer

aligned with the PCI slot you intend to use. Save the bracket

screw.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 77 78

Sin comentarios

LSI U80ALVD Manual de usuario Pagina 22