LSI U80ALVD Manual de usuario descargar pdf (Pagina 43)

LSIU80ALVD PCI to Ultra2 SCSI Host Adapter 3-1

Chapter 3

Conﬁguring the

LSIU80ALVD

This chapter describes conﬁguring the LSIU80ALVD and includes these

topics:

• Section 3.1, “When to Conﬁgure the LSIU80ALVD,” page 3-1

• Section 3.2, “Starting the SCSI BIOS Conﬁguration Utility,” page 3-2

• Section 3.3, “Exiting the SCSI BIOS Conﬁguration Utility,” page 3-14

3.1 When to Conﬁgure the LSIU80ALVD

In most cases you should not need to change the default conﬁguration

of the host adapter. You may decide to alter these default values if there

is a conﬂict between device settings, or if you need to optimize system

performance.

Table 3.1 and Table 3.2 list the conﬁguration settings you can change.

The global settings affect the host adapter and all SCSI devices that are

connected to it. The device settings affect only individual SCSI devices.

Table 3.1 Global Default Settings

Settings for the Host

Adapter and All Devices Default Settings

SCAM Support Off

1. Applies to BIOS version 4.09 and later.

Parity Checking Enabled

Host Adapter SCSI ID 7

Scan Order Low to High

(0–Maximum)

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 77 78

Sin comentarios

LSI U80ALVD Manual de usuario Pagina 43