LSI 3ware SAS 9750-8i Guía de usuario descargar pdf (Pagina 127)

Setting Unit Policies

www.lsi.com/channel/products 115

5 Press Enter to display the choices, use the arrow keys to select the setting

you want (Figure 56), and press

Enter again to choose it.

Figure 56. Read Cache Setting on the Configure screen

6Tab to the OK button and press Enter to select it.

You return to the main 3BM screen.

7 When you are finished making changes, press

F8 to save them and exit

3BM.

Enabling or Disabling Auto Verify for a Unit

Auto Verify can help insure that a unit is verified on a regular basis. This is

important, as it can provide early warning of unstable units and possible data

loss due to a failing drive.

Auto Verify is set on a per-unit basis, and works in conjunction with the

Verify Schedule, which is set on a controller-wide basis. By default, the Verify

Schedule is set to “Basic,” which specifies a weekly day and time for

verification to occur when Auto Verify is enabled.

The steps below describe how to enable or disable Auto Verify for an existing

unit. For more detailed information, see “Using Auto Verification” on

page 157. For how to view or change the Verify Schedule, see “Selecting

Advanced or Basic Verify Schedules” on page 172.

Note: If Auto Verify is disabled for a unit, then verification will only run if you start it

manually or in the event of an unclean shutdown.

You can start a verify manually at any time. See “Starting a Verify Manually” on

page 158.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 341 342

Vikivzn 04 Jan 2024 | 17:05:44

urenrjrjkvnm

Evazoy 07 Jan 2024 | 01:42:43

Med

Renatimzn 07 Jan 2024 | 09:55:43

urenrjrjkvnm

Davidvmm 10 Jan 2024 | 11:36:21

coin

Davidefb 11 Jan 2024 | 11:24:30

coin

Viktorijsw 11 Jan 2024 | 19:38:33

Cinema

LSI 3ware SAS 9750-8i Guía de usuario Pagina 127