LSI 3ware SAS 9750-8i Guía de usuario descargar pdf (Pagina 33)

Basic Steps for Creating a Unit

www.lsi.com/channel/products 21

3 Make sure that the proper drives are listed.

Figure 12. Create Disk Array screen

To name the unit and select the desired RAID configuration

1 (Optional) Press Enter in the Array Name field and type a name for the

unit. Then press Enter again to accept the name.

2 Use the arrow keys or press Tab to move to the RAID Configuration

field and press Enter to display the available RAID levels for the number

of drives you selected.

Figure 13. List of Configuration Choices for Four Drives

3 Use the arrow keys to highlight the desired RAID configuration and

press Enter.

For information about the different RAID levels and when to use each,

see “Understanding RAID Concepts and Levels” on page 5.

4 Use the arrow keys or press Tab to move to the field Stripe Size and

select the desired stripe size (16KB, 64KB, or 256KB).

Notes:

Striping size is not applicable for RAID 1, because it is a mirrored unit

without striping.

For RAID 6, only stripe sizes of 64 KB and 256 KB are supported.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 341 342

Vikivzn 04 Jan 2024 | 17:05:44

urenrjrjkvnm

Evazoy 07 Jan 2024 | 01:42:43

Med

Renatimzn 07 Jan 2024 | 09:55:43

urenrjrjkvnm

Davidvmm 10 Jan 2024 | 11:36:21

coin

Davidefb 11 Jan 2024 | 11:24:30

coin

Viktorijsw 11 Jan 2024 | 19:38:33

Cinema

LSI 3ware SAS 9750-8i Guía de usuario Pagina 33